Cover hygroscopic salts

Hygroscopic salts, often referred to as water-loving salts, are salts that have a propensity to absorb moisture from their surroundings. Unlike most damp issues that can result in mould, dust mites, or rot, hygroscopic salts are relatively benign in nature, much like grease stains. Although they do not lead to structural damage or pose health risks, they can mar the aesthetic appeal of a property, especially during the warm, humid days of summer. This can potentially pose challenges when renting or selling the property. Therefore, addressing hygroscopic salts is often seen as a step towards enhancing a property’s visual appeal and maintaining its market value.

The simplest remedy for this issue is to apply an impermeable barrier over the affected area. This barrier can be created using various materials, but the principle is to prevent further moisture absorption by the salts.

  1. Primer-Sealer – the optimum solution:
    • Zinsser B.I.N. Cover Stain: This solvent-based primer-sealer is highly recommended due to its effectiveness and affordability. Two coats are usually sufficient to create a reliable barrier. It costs around £15 per patch, taking about an hour to apply. The ease of application means most homeowners can undertake this task, or a general builder can include it as part of a larger project. For more significant areas, a layer of gloss paint sandwiched between two layers of Zinsser BIN Cover Stain is advisable.
  2. Other barrier Materials:
    • Oil-Based Paints: A coat of oil-based paint can effectively seal off the salts from moisture. It’s a cost-effective solution that homeowners can easily apply themselves.
    • Vinyl Backed Lining Paper: This is another effective barrier material that can be used to cover the affected area.
    • Dry Lining: A more robust solution, dry lining can also be considered, though it’s a more labour-intensive and costly option.
    • Damp Proofer’s Slurry which may include salt resisting mix or retardant: While often effective, this is not a recommended solution because:
      • It is destructive (hacking off large sections of plaster from walls, skirting boards and radiators), disruptive (often a week of work and dust, leaving an decorated uneven patch of plaster), expensive and over engineering a problem, when the solution is as simple as painting an oil based primer such as Zinsser B.I.N. Zinsser is readily available, may be applied by anyone and only need be applied to the damp patch with about 300mm overlap (two coats, refresh if required), making it affordable, easy and not especially disruptive or destructive compared to damp proofer slurry.
      • Water is applied as the solvent. It is inevitably some salts will migrate during the application. Typically damp proofers will used Zinsser as a back up solution if the “slurry” doesn’t work.
      • It is not always clear tat hygroscopic salts are the only cause. Where there is excess vapour, replacing a large section of plaster with impermeable plaster as is the case with slurry, they you are reducing the walls ability to absorb vapour, exacerbating the effects of excess vapour, increasing the risk of mould. Calcium sulphate salts are liable to crystallise on the interface of the slurry and normal plaster. You will see examples of these amongst my reports.
      • While groundwater, the source of water in rising damp, contains hygroscopic salts, a vast majority of salts found on walls, such as this one, are not caused by groundwater.
  3. Application Technique:
    • Overlap: It’s crucial to extend the barrier material at least 300mm beyond the visibly affected area to ensure complete coverage and to prevent the damp patch from enlarging.
    • Homogenous Treatment: Treat each section of the wall equally to ensure a uniform appearance and functionality, thus promoting consistent humidity absorption or repulsion across the wall.
  4. Additional Measures:
    • For saturated walls where immediate results are not achieved, a layer of oil-based paint sandwiched between two layers of Zinsser BIN oil-based primer can be applied, followed by a standard emulsion to finish.

This treatment not only covers the unsightly appearance of hygroscopic salts but also aids in maintaining a consistent, pleasing aesthetic, which is paramount when showcasing the property to prospective buyers or tenants. By following the guidelines provided, homeowners can effectively manage the issue of hygroscopic salts, ensuring their abode remains attractive and market-ready.

Scroll to Top