Flank walls

Flank walls, or the side walls of a house, are often more susceptible to heat loss and therefore condensation and mould compared to the front or rear walls. This susceptibility is influenced by various factors which might include the following:

1. Exposure to Elements:

  • Flank walls are often more exposed to external weather elements such as wind and rain, which can lead to greater heat loss and moisture penetration.

2. Orientation:

  • The orientation of the wall with respect to the sun may result in less solar gain, which can keep the wall colder.

3. Insulation:

  • While the insulation should technically be similar to the front or back walls, there could be discrepancies in the insulation quality or thickness due to different construction practices or materials used.

4. Heating Distribution:

  • The heating distribution within the house might be uneven, leading to lower temperatures in the rooms adjacent to the flank walls. This is particularly the case if there are fewer radiators or heat sources located near these walls.

5. Ventilation Issues:

6. Thermal Bridging:

  • Thermal bridges, which are areas of the building envelope that have significantly higher heat transfer than the surrounding materials, can occur at flank walls, leading to heat loss.

7. Construction Joints:

  • If the flank wall is adjoining another property or an extension, construction joints may create pathways for heat loss and moisture ingress.

8. External Shading:

  • Adjacent buildings, trees, or other structures might shade the flank wall, reducing the solar heat gain and keeping the wall colder.

9. Absence of Internal Heat Sources:

  • Rooms adjacent to flank walls may be less frequently used or may not have as many internal heat sources, leading to a colder wall surface.

By addressing some of these issues—like ensuring adequate insulation, improving ventilation, and achieving even heating distribution—you can mitigate the problems of heat loss, condensation, and mould on flank walls. Additionally, periodic maintenance and inspection of the insulation and other construction elements of the flank walls can help in maintaining a comfortable and mould-free indoor environment.

Question:

You recommend installing a thermal lining paper.  Would that just be to the entire flank wall that runs the full length of the house? (ie downstairs in front room and kitchen, stairwell, upstairs on landing, rear bedroom (one wall) and front bedroom (one wall).  Would you recommend doing all three external walls of the small rear bedroom (even though we installed insulated plasterboard back in 2007)?

Answer:

To start with, I recommend insulating the areas of greatest heat loss, typically this is where the condensation and mould is taking place, but could be the whole external wall. It is better to use a vapour active insulation, such as wood fibre or thermal lining paper, as insulated plasterboard changes the thermal dynamics of the wall, risking trapping condensation inside the wall from water that has rainwater that has found its way past your masonry paint.

Thermal lining paper benefits from increased surface temperature, of about 1.5°C for every 10°C difference between the inside and outside. Each 1°C represents roughly a 5%RH drop in surface relative humidity, significantly reducing the risk of mould and condensation, but not eliminating it. There is a benefit of it being thin, therefore should not affect cornicing or wall details and as easy to apply as normal lining paper. If you are going to have the property painted, it would be work the extra, say 30% more time and cost to thermal line external walls.

Thermal plasterboard would give you much greater insulation, so there would be little point in applying thermal lining paper to thermal plasterboard and the increased insulation would be marginal.

Scroll to Top