Flashing: An Essential Barrier for Preventing Rainwater Ingress
What is Flashing? Flashing is a protective material used in construction to prevent rainwater from penetrating a building. Commonly made from lead, but also available in other materials like zinc, aluminium, or rubber, flashing is essential for sealing vulnerable joints and seams. It is typically installed at key junctions, such as where roofs meet vertical walls, around chimneys, and between different sections of a building. Flashing works by creating a barrier that directs water away from these junctions, preventing moisture from infiltrating the building envelope.
Common Applications of Flashing
- Roof Flashing: Used to seal the junction between the roof and any vertical structures, such as dormer windows or parapet walls. It ensures water is directed away from the roof and into the drainage system, rather than seeping into the building.
- Chimney Flashing: Installed around the base of a chimney where it meets the roof, chimney flashing prevents water from running down the chimney and causing leaks. This type of flashing usually involves multiple layers, including step flashing and counter flashing, for maximum protection.
- Wall Flashing: Placed where a vertical wall intersects with a roof or where two walls meet at different angles. It is crucial for preventing rainwater ingress in areas where walls and roofs connect, particularly at building extensions.
- Valley Flashing: Used in roof valleys, where two roof slopes meet. Valley flashing is usually installed beneath the roof tiles or shingles to channel rainwater safely into gutters.
Best Practices for Flashing Installation
- Material Selection:
- Lead Flashing: Lead is a traditional and durable choice for flashing, known for its flexibility and longevity. However, long lengths of lead, such as those used in roof valleys, can fracture over time due to thermal expansion and contraction. These repeated movements cause the metal to weaken and develop cracks. To mitigate this risk, expansion joints should be incorporated in long runs of lead flashing.
- Alternatives to Lead: Zinc, aluminium, or EPDM rubber are common alternatives, often selected for budget or environmental reasons. These materials may be less prone to cracking from thermal expansion but have their own limitations.
- Bitumen and Bitumen Felt:
- Bitumen and bitumen felt are often used as inexpensive alternatives to traditional flashing materials. While cost-effective, they have a relatively low life expectancy and can become brittle over time, especially when exposed to fluctuating temperatures and UV radiation. As they age, they may crack or degrade, leading to potential leaks and requiring more frequent replacement.
- Flat and Secure Installation: Flashing should always be kept as flat as possible to ensure water runs off efficiently. Any buckling or unevenness in the flashing material can create pockets where water may pool, increasing the risk of leaks.
- Above and Below Roof Tiles:
- Above Roof Tiles: Flashing installed above roof tiles is often visible and used for features like chimneys or parapet walls. It is more exposed and should be securely fixed and sealed to withstand weather conditions.
- Below Roof Tiles: Flashing placed beneath roof tiles or shingles provides a hidden layer of protection. This method is more discreet and effective at directing water away from the underlying structure. It is commonly used in roof valleys or along eaves.
- Step Flashing and Counter Flashing:
- Step Flashing: This technique is used along sloped roof surfaces, such as where a roof meets a sidewall. It consists of overlapping pieces of flashing that create a stepped effect, ensuring water is directed away from the wall.
- Counter Flashing: This is installed over step flashing to provide an additional layer of protection. It is often built into the wall or masonry, creating a watertight seal.
- Proper Sealing: All flashing should be sealed at the edges to prevent water from sneaking underneath. This is particularly important around chimneys and skylights, where water infiltration is more likely.
- Regular Maintenance: Flashing should be inspected regularly for signs of wear, corrosion, or damage. Even minor issues, like cracks or gaps, can lead to significant water damage if left unaddressed.
Conclusion Flashing is a critical component in any building’s waterproofing strategy. Long lengths of lead flashing, while durable, can fracture from repeated thermal expansion and contraction, necessitating careful installation with expansion joints. Cheaper alternatives like bitumen and bitumen felt may save costs upfront but have a shorter lifespan and become brittle, requiring more frequent repairs or replacement. Whether using lead or modern alternatives, flashing must be installed flat and secure, with regular inspections to ensure the building remains protected from moisture ingress. Properly installed and maintained flashing can prevent costly water damage and maintain the structural integrity of the property.
