Heat Recovery

Heat Recovery Ventilation (HRV)

Definition:
HRV systems are designed to improve indoor air quality while minimising heat loss. They work by capturing heat from expelled indoor air and using it to warm incoming fresh air. Despite claims of high efficiency, the real-world effectiveness of these systems is significantly lower.


How They Actually Work:

  1. Air Extraction Cycle:
    Warm, stale air from the property is expelled through the HRV unit over a period (around 5 minutes). The air passes through a porous, vapour-permeable material—often a clay-like substance with microscopic holes—that temporarily absorbs heat.
  2. Heat Storage and Transfer:
    This porous material warms up as it absorbs heat from the outgoing air. Once sufficiently heated, the system switches to drawing in fresh, cold air from outside.
  3. Air Intake Cycle:
    The cold, incoming air flows through the warmed material, absorbing the stored heat before entering the home. This method does not involve continuous heat exchange but relies on a time-lapse process, which leads to inefficiencies.
  4. Risk of Inefficiency:
    If the cycle is too short (less than 5 minutes), expelled vapour may be reintroduced into the home, especially if there is poor outdoor air circulation. In still weather, with limited wind, this risk increases.

Efficiency Limitations:

  • Delayed Heat Exchange:
    Unlike conventional heat exchangers that continuously transfer heat, HRV systems suffer from a time delay. The heat stored in the material gradually dissipates, reducing overall efficiency.
  • Realistic Heat Recovery Rates:
    Manufacturers claim up to 90% efficiency, but in reality, heat recovery rates are often less than 50%. A more practical estimate is around 25% because of heat loss during the expulsion and intake phases. Cold air is drawn in through gaps, trickle vents, or draughts, while heat from the stored material quickly dissipates.

Dependence on External Conditions:

The performance of HRV systems is heavily influenced by external weather conditions. When the outside air has high moisture levels or the temperature difference is unfavourable, HRV systems struggle to control humidity and heat efficiently. In calm weather, there is also a higher risk of drawing back expelled moisture.


Not a Substitute for Targeted Ventilation:

HRV systems cannot replace bathroom or kitchen extractor fans, which are essential for removing moisture directly at the source. They are also ineffective for drying clothes indoors, where dehumidifiers are a much better solution. Dehumidifiers extract moisture and release all their consumed energy as heat, making them more efficient for this purpose.


High Operating Costs and Maintenance:

  • Energy Costs:
    HRV systems can be expensive to operate. The energy cost of reheating air expelled from the property can result in annual expenses of around £200 per unit. The main energy loss comes from heated air being replaced by cold external air.
  • Maintenance Requirements:
    Regular maintenance is crucial, including cleaning filters and checking the porous material. Neglecting these tasks reduces efficiency and increases costs.

Growing Skepticism and System Removal:

Due to the high costs and inefficiencies, many homeowners and professionals are sceptical about the long-term value of HRV systems. Targeted ventilation using extractor fans, combined with dehumidification, has been found to be more effective and cost-efficient. As awareness grows, some properties are opting to remove HRV units in favour of simpler, more reliable solutions.


Conclusion:

While HRV systems may be suitable for highly airtight, modern homes, they are generally less effective for older or draughty properties. The reliance on external conditions, delayed heat exchange, and high running costs make them a suboptimal choice. A combination of targeted ventilation and efficient dehumidification often yields better results, improving both moisture control and energy efficiency.

Scroll to Top