Managing Bathroom Humidity

Definition:

Definition:

Effective management of bathroom humidity is essential to prevent damp and mould issues around a property, caused by excess moisture from modern showering habits. Fast, hot showers are a staple of modern living, often taken once or twice a day. Each shower generates approximately 0.5 litres of water as vapour, with more produced if the shower is longer, hotter, or at higher pressure. Around 90% of the moisture remains in the bathroom after the shower is turned off, settling on surfaces like floors, walls, and mirrors. This underscores the need for:

The following key practices are recommended:

1. Ventilation:

• Ventilation: Bathroom fans should run at least 15 litres per second, for at least 30 minutes after showering, but continuous ventilation is ideal.

The fan should suck air from near the shower to the outside, with a rigid ducting. Check performance of the fan by testing the airflow with an anemometer at the outlet.

In tenanted properties: it is wise to make sure the fan starts automatically with lights or better still using a sensor.

• Heating: Maintain some heat in the bathroom to evaporate residual water from surfaces effectively, or use blades to move water to the plug hole.

2. Door Management:

After showering, bathroom doors are often left open, allowing moist air to spread throughout the home. To prevent this:

• Keep the bathroom door closed to ensure moisture exits via the extractor fan or ventilation system.

• Consider installing a spring hinge (also known as a perko or similar) to ensure the door closes automatically.

3. Undercut for Airflow:

Ensure there is an undercut of approximately 8mm (0.8cm) beneath the bathroom door. This gap allows for the free movement of air, enabling the extractor fan to work efficiently.

By adopting these measures, the humidity in your bathroom can be effectively managed, reducing the risk of damp-related problems.

The following key practices are recommended:

1. Ventilation:

• Bathroom fans should run at least 15 litres per second, for at least 30 minutes after showering, but continuous ventilation is ideal. In tenanted properties the fan should come on automatically with lights of via sensor..

• The fan should suck air from near the shower to the outside, with a rigid ducting. Check performance of the fan by testing the airflow with an anemometer at the outlet.

2. Heating: 

• Maintain some heat in the bathroom to evaporate residual water from surfaces effectively, or use blades to move water to the plug hole – Alternatively, consider using a squeegee or towel to remove standing water from surfaces.

3. Door Management:

After showering, bathroom doors are often left open, allowing moist air to spread throughout the home. To prevent this:

• Keep the bathroom door closed to ensure moisture exits via the extractor fan or ventilation system.

• Consider installing a spring hinge (also known as a perko or similar) to ensure the door closes automatically.

4. Undercut for Airflow:

Ensure there is an undercut of approximately 8mm (0.8cm) beneath the bathroom door. This gap allows for the free movement of air, enabling the extractor fan to work efficiently.

By adopting these measures, the humidity in your bathroom can be effectively managed, reducing the risk of damp-related problems.

Scroll to Top