Masonry paint

Question:

You recommend using impermeable paint on the outside of the long flank wall.  Previously, when we did work on that wall in 2015, they brushed off the paint and supposedly applied a breathable paint so the moisture would not be trapped inside the brickwork and make its way into the house.  I’m a little confused.  Could you please clarify why using impermeable paint is preferable?

Answer:

Absolutely. Ideally, paint should be as permeable or “breathable” as possible, to allow moisture to evaporate evenly out. However, in your situation, it appears the paint has trapped moisture, causing calcium sulphate, a key ingredient in the cement mortar to crystallise beneath the paint, leading to blistering. This indicates that either the paint was not “breathable” i.e., it was impermeable.
Or, and this might be more likely in your case, that remnants of the original paint were not entirely removed and were painted over, creating an inconsistent layer. This inconsistency results in water becoming trapped behind the old paint.

Either way you should

  • take the paint back to brick and apply a permeable “breathable” paint, but this is difficult to achieve and therefore the more expensive option,
  • or, more practically, wire brush down the paint to remove flakes and crystallised salt and repaint with a type of paint that is as impermeable as any of the original layers of paint or if unknown, use an impermeable paint.

Consistency and regular maintenance are key. Typically paint needs to be checked and reapplied roughly every 7 years. Of course it would be better to have no paint.

Scroll to Top