Repaint external wall

Removal and Repainting of External Wall Paint for Damp Prevention

Introduction: The upkeep of external paint on brick walls is an essential measure to preserve the structural integrity and thermal efficiency of a home. Over time, paint may show signs of distress like crystallisation and micro-cracking behind its layer, indicating a possible moisture problem. This glossary item delves into the procedure of removing old paint, selecting the appropriate new paint, and understanding the implications on damp and insulation.

Steps for Paint Removal and Repaint:

  1. Inspection:
    • Look for signs of crystallisation and micro-cracking behind the paint, which indicate trapped moisture and potential damp issues.
    • It’s important to check and address these issues approximately if noticeable deterioration occurs, typically after about 5 to 10 years depending on the paint and weather.
  2. Paint Removal:
    • Utilise a wire brush to scrub away the old paint on the external walls back to the brick, especially where surface salts are visible.
    • Strive to remove as much paint as possible to alleviate the immediate moisture issue.
  3. Selection of Paint:
    • If repainting is chosen over leaving the bricks unpainted, select a paint that is ideally as impermeable, or more so, than the existing paint.
    • Recommended brands include Zinsser or Dulux external masonry paint.
    • Although, it’s generally better to use “breathable” lime paint or leave the brick walls unpainted to allow for natural evaporation of moisture.
  4. Repainting:
    • This step should be undertaken during a dry spell, which could occur in winter, but is more likely and preferable in spring or summertime.
    • Apply the chosen paint meticulously, ensuring a good, even cover that provides a barrier to rain penetration while allowing the wall to breathe.
    • Consider using an absorption-reducing cream like DryZone on the section of bricks above the painted bricks to reduce moisture absorption.
  5. Maintenance:
    • Once an impermeable coat is applied, it is imperative to maintain the external coat in good order to prevent rainwater penetration, especially at the interface between the brick and paint.

Implications:

  • When rainwater penetrates, it tends to dampen the external coat of the wall, causing heat loss, increased surface relative humidity, and a higher risk of condensation, interstitial condensation (condensation within the wall) and surface mould.
  • Moisture, drawn downwards by gravity, affects insulation as a wet wall is a poor insulator, heightening the risk of condensation.
  • The dampness tends to accumulate at the base of the wall, often mistaken for rising damp, while higher parts of the wall dry out first.

Conclusion: Following the right procedure for removing and repainting external wall paint is a proactive step towards averting damp issues, thereby promoting a healthier and more energy-efficient living environment. Choosing the right time of year for this maintenance task ensures a better and more durable result, contributing to the overall longevity and efficiency of the home.

Scroll to Top