Rolled Steel Joist

RSJ (Rolled Steel Joist):

Role in Property Extensions and Common Damp-Related Issues

What is an RSJ? An RSJ, or Rolled Steel Joist, is a strong, horizontal structural beam commonly used in construction to provide support when extending or reshaping properties. RSJs are often essential in projects that involve removing load-bearing walls or creating large open spaces, such as kitchen extensions, loft conversions, or structural openings in homes. Their strength and durability make them ideal for supporting substantial loads from floors, ceilings, or roofs.


RSJ Placement and Insulation Challenges RSJs are typically positioned a single brick width away from external or internal walls. This configuration can create significant insulation challenges. Due to their placement and the conductive nature of metal, RSJs can rapidly lose heat, especially if they drop into unheated spaces like sub-floor voids or penetrate down into the ground.

When the RSJ is poorly insulated, or not insulated at all, heat loss through the metal can be pronounced. This rapid heat loss increases the risk of condensation forming on or around the RSJ. There are two primary types of condensation that may occur:

  1. Surface Condensation: Occurs when warm, moisture-laden air comes into contact with the cold surface of the RSJ. The moisture condenses on the surface, creating damp patches that can lead to issues such as mould growth or corrosion.
  2. Interstitial Condensation: Happens within the building structure itself, where moisture condenses in hidden areas, such as inside walls, floors, or ceilings. This can be particularly problematic as it may not be immediately visible and can lead to hidden damp issues, timber rot, or structural deterioration over time.

Factors That Increase the Risk of Condensation The risk of condensation on or around RSJs is exacerbated by two main factors:

  1. Excess Internal Vapour: When the dew point (a measure of moisture in the air) inside a building is higher than the outside temperature, the air becomes saturated and more prone to condensation. Sources of excess vapour include cooking, bathing, drying clothes indoors, and inadequate ventilation.
  2. Insufficient Insulation: Lack of insulation around the RSJ allows the metal to cool rapidly, increasing the likelihood of condensation forming. Without proper insulation, the RSJ acts as a thermal bridge, conducting heat away from the interior and creating cold spots in the building envelope.

Preventative Measures and Recommendations

  1. Improve Insulation: Ensure that RSJs are properly insulated to minimise heat loss. Using high-quality insulation materials around the RSJ can reduce the risk of both surface and interstitial condensation.
  2. Control Internal Humidity: Reduce excess vapour in the air by using extractor fans in kitchens and bathrooms, avoiding drying clothes indoors, and running dehumidifiers as needed. Keep the internal dew point lower than the outside temperature as much as possible.
  3. Regular Inspections: Check for signs of condensation, such as damp patches, corrosion on the RSJ, or water staining on nearby walls. Address issues promptly to prevent long-term damage.
  4. Install Vapour Barriers: In areas prone to high humidity, consider using vapour barriers to control the movement of moisture through the building structure.

Summary RSJs are essential structural components in many property extensions and renovations. However, due to their high thermal conductivity and typical placement near walls or into sub-floor voids, they can be a source of significant heat loss and condensation risk. Proper insulation and moisture management are crucial to mitigating these issues and protecting the structural integrity of the property.

Scroll to Top