Internal vapour control refers to the strategies and measures used to manage and reduce water vapour levels inside a property, thereby preventing condensation, mould growth, and damp-related issues. Water vapour is generated through everyday activities such as cooking, showering, boiling kettles, drying clothes indoors, and even breathing. Without proper vapour control, this moisture can condense on cold surfaces, leading to black mould, deterioration of building materials, and potential health concerns.
How Vapour Builds Up
When warm, moisture-laden air comes into contact with cold surfaces—such as uninsulated walls, ceilings, windows, or cold water pipes—it cools rapidly, causing water vapour to condense into liquid water. This often occurs in poorly insulated properties or those with inadequate ventilation. For example:
• Mould Growth: Condensation on cold walls, window frames, or behind furniture can lead to black mould growth, which can damage paintwork, plaster, and furniture, and may cause respiratory issues.
• Condensation on Ducting: If extractor fan ducting runs through cold spaces like lofts without proper insulation, moisture in the warm air can condense inside the duct, leading to water pooling, leaks, or dripping back into the property.
• Cold Water Pipes: Exposed cold water pipes can act as condensation points, especially in areas with poor insulation or insufficient ventilation, worsening internal moisture problems.
Impact of External Temperatures
During colder months, especially when external temperatures drop below zero, the temperature difference between the inside and outside of a property becomes more pronounced. This increases the risk of condensation. To counteract this:
• Insulation should be used to raise internal surface temperatures, reducing the chance of condensation forming. Insulating cold water pipes, ducting, and external walls helps prevent moisture accumulation.
• Airflow is crucial. Without adequate ventilation, even insulated properties can suffer from high humidity levels. Extractor fans, trickle vents, and controlled background ventilation are essential for removing moist air.
Best Practices for Vapour Control
To effectively control internal vapour levels, properties should implement a combination of ventilation, heating, and insulation measures:
1. Ventilation:
• Install extractor fans in kitchens and bathrooms. Bathroom fans should extract at least 15 litres per second and run for at least 30 minutes after use; continuous flow fans are ideal, especially in rental properties or ground-floor flats.
• Kitchen extractor fans should vent outside and be used during and after cooking to remove moisture and cooking vapours.
2. Heating:
• Maintain consistent heating to keep internal surfaces warm, reducing the likelihood of condensation forming.
3. Insulation:
• Insulate external walls, ceilings, and cold surfaces like pipes and ducting to prevent cold spots.
4. Moisture Management:
• Dry clothes outdoors where possible. If indoor drying is unavoidable, use a dehumidifier capable of extracting at least 20 litres per day.
• Avoid indoor drying when internal vapour levels are high, especially when the internal dew point exceeds the external temperature.
5. Monitoring:
• Use data loggers or hygrometers to monitor humidity and internal dew point levels. Ideally, the internal dew point should remain below the external temperature to prevent condensation.
Example Scenario:
If the external temperature falls to -2°C, and the internal air is warm but humid (with a dew point above the temperature of external walls), condensation can form on uninsulated walls or around poorly sealed windows. In this situation, insulating the walls and ensuring airflow through extractor fans or trickle vents will help keep internal surfaces above the dew point, preventing condensation and mould formation.
Implementing comprehensive internal vapour control not only helps prevent damp-related problems but also contributes to a healthier indoor environment and protects the integrity of the building structure.
